• DEM2D Series Din-Rail 75mV DC Meter accordance with CE
  • DEM2D Series Din-Rail 75mV DC Meter accordance with CE
  • DEM2D Series Din-Rail 75mV DC Meter accordance with CE
DEM2D Series Din-Rail 75mV DC Meter accordance with CE
$60.00
Model
DCM-2000-
Basic info
Brand Wone
Model NO. DEM2D Series Din-Rail 75mV DC Meter accordance with CE
Rated voltage DC1kv
Rated normal current 2000A
Rated frequency 50(Hz)
Methods of Communication RS485
Series DEM2D003
Product Detail

Description

It adopts a standard 75mV design, and configures the shunt of the corresponding specification according to the actual current in the field for measurement, and has a wide range of applications. RS485 communication, support Modbus protocol and DLT645 protocol, baud rate 9600bps, can use data centralized meter reading, equipment docking and parameter setting.

Features

  • RS485 communication: used for parameter setting, data reading; DTL645 protocol/Modbus Protocol.

  • DC metering: using shunt sampling, high measurement accuracy; can measure DC power, current, voltage.

  • Alarm function: Over-current alarm: When the current exceeds the CT1 value set by the meter, an alarm event occurs, and the alarm light on the electrical surface panel lights up (yellow light).

  • At the same time, the value of the corresponding alarm status register will change, and the user can read this register through communication to determine whether an over-current alarm has occurred.

  • Display: LCD with backlight ,Support Various parameters display,energy data and Instantaneous parameters.

  • Firmware upgrade: RS485 local upgrade.

Specifications

Main
Range DEM2D003
Product or Componet Type Energy meter
Country of origin China
Complementary
Phase Single Phase
Type of measurement

-----

Metering type

Measurement

Device Application

Energy Charge

Accuracy class Active power 1.0 
Rated Current

2000A

Rated Voltage

DC 5V~1000V

Network Frequency 50-60Hz
Technology Type Electronic
Display Type LCD display(LCD 6+2 = 999999.99kWh)
Impulse Constant

According to 1000imp/kWh,

Maximum value measured 99999.99kWh
Tariff input ----
Communication port protocol Modbus and DLT645
Communication port support RS485 
Local signalling

------

Number of inputs -------
Number of Outputs --------------
Output voltage -----
Mounting Mode Clip-on
Mounting Support DIN rail
Connections - terminals

-------

Standards

CE



Environment
IP degree of protection

IP54

Relative humidity ≤95%
Ambient air temperature for operation 25…70 °C
Ambient Air Temperature for Storage 25…70 °C
Operating altitude ---
Dimensions 73mm*36mm*90mm
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 92mm
Package 1 Width 38mm
Package 1 Length 75mm
Package 1 Weight 1.000kg



Connection Diagram

image.png


Dimensions

image.png






Know your supplier
Wone
Main Categories
High voltage/Low voltage/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$50,000,000
Professional Experience
1 years
Workplace
65666m²m²
占位
占位
Related Products
Related Knowledges
Application of Prefabricated Substation Enclosures in Utility-Scale PV Plants at High Altitudes
Application of Prefabricated Substation Enclosures in Utility-Scale PV Plants at High Altitudes
In recent years, driven by policies and the enabling environment, the domestic new energy industry has achieved rapid development. A large number of photovoltaic (PV) projects have been introduced into the power market, and high-altitude PV projects are among them. If prefabricated cabin substations can be utilized scientifically and rationally, high-altitude PV projects can feature short construction cycles, quick commissioning, and relatively low investment levels. This is of great significanc
Echo
06/14/2025
Research and Application of Prefabricated Enclosure Structure for High-Voltage Compartments in Substations
Research and Application of Prefabricated Enclosure Structure for High-Voltage Compartments in Substations
The economic development demands higher efficiency in substation construction, giving rise to prefabricated cabin substation technology. With modular design, equipment wiring, commissioning, and prefabrication are completed in factories, requiring only "building-block" assembly on-site. Take the 10kV prefabricated high-voltage room as an example: equipment and cabin are installed in the factory, with on-site work limited to busbar and cabin assembly. The main transformer incoming line connects v
Echo
06/14/2025
Modular Intelligent Substation - Prefabricated Secondary Switchgear Integration Assembly
Modular Intelligent Substation - Prefabricated Secondary Switchgear Integration Assembly
With the development of the national economy and society, the requirements for the quality and craftsmanship of power grid projects have become increasingly stringent. The need to improve the construction progress and quality of substations has created opportunities for the promotion of prefabricated cabin - type intelligent substations. The traditional on - site wiring and commissioning of secondary substation equipment involve a large amount of work. Moreover, on - site construction has to wai
Echo
06/13/2025
Application of Pre-integrated Prefabricated Substations in Renewable Energy Sector
Application of Pre-integrated Prefabricated Substations in Renewable Energy Sector
Against the backdrop of profound changes in the global energy landscape and the booming development of the new energy industry, the construction mode of traditional substations struggles to meet the rapid deployment needs of new energy projects. The modular intelligent prefabricated cabin substation, leveraging its innovative advantages, has become a key direction for optimizing the new energy power system. In - depth exploration of its technical principles, industry adaptability, and applicatio
Echo
06/13/2025
Research on Reliability Enhancement Scheme Implementation for Modular Intelligent Prefabricated Substations
Research on Reliability Enhancement Scheme Implementation for Modular Intelligent Prefabricated Substations
1 Implementation Strategies for the Scheme1.1 Deepen Survey and ResearchBefore constructing prefabricated cabin - type substations, it is necessary to conduct detailed surveys of local working conditions, clarify the construction scale and objectives, evaluate existing power facilities, plan projects, make up for infrastructure shortcomings, and adjust the construction rhythm. Meanwhile, control costs to avoid project suspension.1.2 Strengthen Structural ConstructionDuring promotion, multi - dim
Echo
06/13/2025
Comparative Analysis of 500 kV Prefabricated Substations vs. Conventional Substations
Comparative Analysis of 500 kV Prefabricated Substations vs. Conventional Substations
The secondary equipment area of conventional substations uses reinforced concrete or prefabricated steel structures, facing issues like long construction cycles, unreasonable functional zone design, strict environmental assessments, dust, noise, and disturbances. Primary and secondary equipment can only be installed after civil works and decoration, lowering construction efficiency.Prefabricated cabin substations integrate modularity, intelligence, and cost - effectiveness, boasting green, energ
Dyson
06/13/2025
×
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
商品视频播放